Where to put a woven label: size & placement guide
Starting points for size, placement and fold style on caps, gloves, shawls, scarves, crochet, beanies, tote bags and blankets — not just garments.
The sizes below are practical starting points, not fixed standards — they refer to the label’s visible finished area, and we add the material needed for the fold or seam insertion. Fold styles referenced here (Straight Cut, Centre Fold, End Fold) match the options on our Woven Labels page. Tell us the exact item and we’ll confirm size, placement and fold before production.
Caps & hats
What size woven label should I use on a baseball cap?
Start with a 35–55 x 20–35mm visible label on a front or side panel, clear of the bill seam. Straight Cut (Flat) gives a neat sewn-on patch; keep it compact and check it on the curved cap so it doesn’t bridge panel seams or pucker.
Where should I sew a label inside or on the back of a cap?
A 15–25 x 30–45mm label works at the back opening or inside the sweatband; use a Centre Fold if it can be caught in that seam. Keep the label soft and clear of the adjustable closure so it doesn’t rub the wearer.
Can a woven label be sewn onto a curved cap without wrinkling?
Use a small 20–35 x 20–30mm label on the flattest part of a side panel, sewn Straight Cut (Flat). Avoid spanning a panel seam, and approve a sample on the actual cap — the crown’s curve can make a larger label lift or ripple.
Gloves
What size woven label fits on gloves?
Try 12–20 x 20–35mm on the outside cuff or back of the wrist, away from the palm and thumb. Straight Cut (Flat) works for a small sewn-on patch; keep the label compact so it doesn’t stiffen the cuff or catch on things.
Where should I put a woven label on knitted gloves?
A 15–20 x 30–40mm label suits the outer cuff edge; use a Centre Fold if it can be inserted into the cuff seam. Ribbed cuffs stretch, so sew without pulling the knit tight and check the label doesn’t restrict the fit.
Can I sew a woven label onto leather or waterproof gloves?
Use a 15–25 x 30–40mm label at the outer wrist or cuff seam, with an End Fold inserted into the seam or a Straight Cut (Flat) patch on a suitable flat panel. Avoid the palm and any waterproof membrane, since needle holes can affect grip or waterproofing — test on a sample first.
Shawls
What size woven label is suitable for a shawl?
Start with a 15–25 x 30–45mm label at an inside lower corner or short edge, sewn Straight Cut (Flat) for a clean finish. Fine, drapey shawls suit a small, lightweight label; hand-sewing avoids puckering.
Where should I sew a label on a shawl so it is easy to find?
Place a 15–20 x 30–40mm label on the reverse near a lower corner, about 15–25mm in from the finished edges. Sew Straight Cut (Flat) with small stitches and avoid open weave or fringe, which can distort or snag.
Can I add a woven label into the edge of a shawl?
Yes — use a 15–20 x 35–50mm label with a Centre Fold caught into a short-edge hem or side seam. This makes a small flag label; keep it clear of fringe and check the added thickness doesn’t interrupt the drape.
Scarves
What size woven label works best on a lightweight scarf?
A 12–18 x 25–35mm label at an inside corner is a good starting point, about 15–20mm from both edges. Sew Straight Cut (Flat) and choose a soft, lightweight label so it doesn’t weigh down silk or other fine fabric.
Where should I sew a label on a fringed scarf?
Use a 15–20 x 30–40mm label at a lower corner, just above the fringe. A Centre Fold caught into the hem works well; don’t stitch through the fringe, which moves freely and can pull the label out of shape.
How do I label a reversible scarf?
Put a 15–20 x 30–40mm label at a short-end hem and use a Centre Fold so the label shows on both sides. Keep the stitch line tidy on both faces and avoid a bulky fold that could affect how the scarf sits.
Crochet & knitted items
Can you put a woven label on crochet or knitted items?
Yes — start with a 15–20 x 25–40mm label at a dense hem, side edge or other stable section, sewn Straight Cut (Flat). Sew through the stitches without pulling them tight; a small backing patch helps if the area is loose or openwork.
Where should a label go on a knitted sweater or crochet item?
A 15–20 x 30–45mm label usually works at a lower side hem or inside the back neck below the ribbing. Use Straight Cut (Flat) for a plain patch, or a Centre Fold if it can go into a seam; avoid stretchy ribbing that may pucker or lose its stretch.
How do I stop a label stretching or snagging a knit?
Choose a compact 15–20 x 25–35mm label and sew it onto a dense section, Straight Cut (Flat) with its edges secured. For loose crochet or chunky knit, add a light backing and hand-sew through stable loops without tightening the yarn or sewing across open spaces.
Beanies
What size woven label should I use on a beanie cuff?
A 20–25 x 35–50mm visible label is a useful starting point on the front or side of the cuff. Use a Centre Fold to make a fold-over cuff tab, and account for the cuff’s stretch so the label doesn’t pull the knit out of shape.
Where should I sew a label on a beanie?
A 15–25 x 30–45mm label can go on the outer cuff or near the back seam, depending on how visible you want it. Use Straight Cut (Flat) for a plain patch or a Centre Fold at the cuff edge, and keep it away from the wearer’s forehead if it could feel scratchy.
Can I label a beanie that has no folded cuff?
Yes — try a 15–20 x 30–40mm label on the lower side edge or near the back seam, using a Centre Fold if it can be caught in a seam. If sewing it flat, use Straight Cut (Flat) on a stable knit area so the stretchy fabric doesn’t wave around the label.
Tote bags
What size woven label should I use on a tote bag?
A 20–30 x 40–60mm label suits an exterior brand mark near a lower corner or side seam. Sew Straight Cut (Flat), and check the label against the bag’s canvas weight so it doesn’t look undersized or feel bulky.
Where should I put a woven label on a tote bag?
Use a 15–25 x 35–50mm label at the top of a side seam or gusset, clear of the handles and bag opening. A Centre Fold makes a tidy side-seam tag; on thick canvas, sew through the seam allowance where possible.
Where should an inside tote-bag label go?
A 20–30 x 40–60mm label fits inside the bag near the top edge, pocket or lining side seam. Use a Centre Fold caught into the seam, attached before the lining is closed if you want exterior stitches hidden.
Blankets & throws
What size woven label works on a blanket or throw?
Start with a 20–30 x 40–60mm label at a lower corner on the reverse side. Sew Straight Cut (Flat) for a plain corner label; keep it off the main sleeping surface and check the size suits the pile or thickness.
Should a blanket label be sewn into the edge?
Yes — a 20–30 x 40–60mm label with a Centre Fold can be caught into the bottom or side hem as a small tab. Thick fleece and plush pile can make seams bulky, so check the fold and stitch placement on a sample.
How should I label a knitted or crocheted throw?
Use a 20–30 x 40–60mm label at a dense border or lower corner, Straight Cut (Flat) for a plain patch or a Centre Fold in the border seam. Avoid lacy edges; sew through stable stitches and add backing if the yarn is loose or the label is heavy.
Not sure how your item should be labelled?
Send us a photo of the item and we'll suggest the size, placement and fold that works — free, no obligation.